Allan Piso WiFi Login, Timer Board Setup & Pause Time (10.0.0.1)

Allan Piso WiFi systems are the backbone of DIY and commercial coin-operated internet vending machines across the Philippines. Renowned for their robust hardware reliability, Allan multi-coin selectors (such as the Allan 1234 and Allan 2026 programmable boards) interface seamlessly with Raspberry Pi, Orange Pi, and MikroTik controllers running LPB or AdoSoft firmware.

⚡ Instant Allan Portal & Gateway Shortcuts

Ensure your phone or computer is connected to the vendo’s Wi-Fi network before accessing the gateway:

What is an Allan Timer Board in Piso WiFi?

In standard Philippine Piso WiFi builds, the Allan timer board acts as the hardware bridge between the physical coin acceptor and the software router. When a customer inserts a ₱1, ₱5, ₱10, or ₱20 coin, the optical sensor inside the Allan coin selector converts the physical currency into precise electrical pulses sent to the main controller.

Unlike purely software-controlled systems, Allan hardware boards feature independent 4-digit LED countdown displays, anti-stringing optical sensors, and mechanical coin return mechanisms that prevent jamming.

Allan Piso WiFi Default Admin Credentials

When accessing an Allan-powered vendo gateway via http://10.0.0.1/admin or direct board programming, use the following factory default settings:

Hardware / Firmware ModelDefault GatewayDefault UsernameDefault Password / PIN
Allan Multi-Coin Acceptor (Universal)http://10.0.0.1adminadmin or 123456789
Allan Timer Board + LPB Firmwarehttp://10.0.0.1/adminadminadmin1234
Allan Dual Coin Slot + AdoPiSofthttp://10.0.0.1/adminadminadmin
Allan Standalone LED Board (No PC)Manual Button BoardKey SwitchPhysical Master Key

How to Calibrate Coinslot Pulses on Allan Boards

For the Allan coinslot to accurately recognize both the Old (Silver/Brass) and New Generation Currency (NGC) Philippine coins, the pulse configuration must match your software rates:

  • ₱1 Coin (New & Old): Set pulse value to 1 Pulse (typically 10 to 15 minutes of internet time).
  • ₱5 Coin (Round & Nonagon): Set pulse value to 5 Pulses (typically 1 hour of internet time).
  • ₱10 Coin (Bi-metallic & Silver NGC): Set pulse value to 10 Pulses (typically 2.5 to 3 hours).
  • ₱20 Coin (Bi-metallic): Set pulse value to 20 Pulses (typically 6 to 8 hours).

How to Pause & Resume Time on Allan Piso WiFi

If your Allan machine is running LPB or Ado software, follow these steps to pause your active minutes:

  1. Connect your smartphone to the vendo Wi-Fi signal.
  2. Open your browser and navigate to http://10.0.0.1 (or bookmark our Piso WiFi portal home).
  3. Tap the green “Pause Time” button on your active session dashboard.
  4. Crucial: Do not enable “Private Wi-Fi Address” or randomized MAC address on your phone, otherwise the vendo cannot recognize your device upon reconnecting.
  5. When ready to resume, return to the SSID, open 10.0.0.1, and tap “Resume Time”.

Explore our related documentation for other vendo systems: